In this article, we use so-called affiliate links. With every purchase through these links, we receive a commission from the merchant. All relevant referral links are marked with . Learn more.
The MT500 Advanced rain jacket is the centrepiece of a whole range of new weatherproof clothing from Endura - which we have summarised here in a separate article. It is available for both men and women.
Endura uses a three-layer Pertex Shield material for this model, which is characterised by its low weight, waterproofness and small pack size. With a water column of 20,000 mm and a vapour permeability of 20,000 g/g/m²/24hr, the MT500 ADV delivers impressive values, at least on paper.
Endura MT500 Adv jacket - info & price
- Weight395 grams (size L)
- Material3-layer Pertex Shield
- Water column: 20,000 mm
- Breathability: 20,000 g/m²/24hr
- EquipmentAdjustable, helmet-compatible hood with SlideLock adjustment system
- VentilationHidden laser-cut perforations
- ClosureWater-repellent 2-way front zip and press stud system
- Special features: Small pack size, hood can be stowed in the collar
- Price: 350 Euro >> available here
Extensive equipment and clever details
In terms of features, the new MT500 ADV has a lot to offer, even if Endura doesn't go all out here in favour of weight. The jacket has a helmet-compatible hood that can be extensively customised thanks to its SlideLock adjustment system.
When not in use, the hood can be stowed away in the collar with flat press studs and therefore does not flap uncomfortably in the wind. Endura has dispensed with underarm ventilation via a zip. Instead, there are hidden laser cuts under the arms to ensure heat dissipation.
Many options for fresh air
For additional temperature regulation, Endura has equipped the jacket with a water-repellent 2-way front zip and a press stud system. This combination allows you to wear the jacket with the zip open without it fluffing up unnecessarily in the wind. Two front pockets with mesh inserts provide storage space and additional ventilation, and there is also an internal chest pocket for your smartphone.
The sleeves are cut slightly longer and fitted with small flaps to ensure a solid fit on the bike and to prevent gaps through which the rain could penetrate. The back section is also slightly longer towards the buttocks.
First test: Our impression from practice
The MT500 series from the Scots has a certain reputation: The parts are robust, durable and extensively equipped - and thus made for daily hardcore use on the trails of this world.
The new ADV rain jacket is no exception: the 20,000 Pertex 3-layer material reliably withstands both the Suter test in our laboratory and nasty showers in the real world. The long sleeves with flaps that reach down to the gloves are particularly successful. The extended rear also keeps splash water from creeping into the bike trousers.
And the hood not only impressed me on the bike, but also in a snowstorm on a ski tour. It can be adjusted perfectly, fits over the helmet as well as without and sits securely even in strong winds. The push-button fastening is successful but also necessary: Otherwise the hood would flap annoyingly in the wind when not in use.
Useful ventilation options, moderate cut
The MT500 ADV's many ventilation options are just as useful as they are necessary. If all the hatches are closed, the Endura quickly becomes as warm as an incubator. So, open all the zips, close the snap fastener in front of the chest and you'll be able to stay in the jacket even on the climb.
The cut of the MT500 ADV only partially convinced me: the Endura has a flatter cut, especially on the chest and stomach, and is not very bike-specific. In addition, the robust front zip is very snaggy and can sometimes be difficult to close when wearing gloves. The same applies to the side adjustment of the hood: the small sliders run sluggishly and are difficult to grip with gloves.
Conclusion: Endura MT500 Advanced Waterproof Jacket
In terms of weather protection, the Endura has hardly any weaknesses: The material is permanently waterproof and the sleeves, back and hood reliably prevent water from penetrating inside. The many ventilation options are also necessary due to the rather sweaty material. In terms of zip function and cut, there are slight deductions - the Endura MT500 Advanced does not have a really bike-specific cut. However, the expensive jacket is also suitable for other mountain sports, which puts the price of 350 euros into perspective.
Stefan Frey
Editor
